Home > News >

The Timken Company, a global industrial leader in engineered bearings and power transmission products, announced today that its automatic lubrication systems portfolio has more than doubled in size from a revenue standpoint over the past five years through a combination of organic growth and strategic acquisitions. With its Groe...

SKF imported bearings are widely used, and bearing installation, use, cleaning and maintenance are also very particular. Therefore, there will naturally be some problems in the use of SKF bearings. Today, Eric Bearing Limited will explain to everyone about the installation and maintenance of SKF imported bearings. 1. SKF bearing...

Bearings are an important part of contemporary machinery and equipment. Its main function is to support the mechanical rotating body to reduce the friction coefficient of the mechanical load during the transmission of the equipment. Among them, SKF bearings are one of the common imported bearings. What do we need to pay attentio...

Everyone knows that in the use of FAG bearings, some are lubricated, and some are not. Why is that? Shouldn't everything be lubricated? Actually otherwise, ERIC BEARING LTD will introduce the performance characteristics of oil-free FAG bearings below. 1. No or less oil lubrication, suitable for places where it is impossible or d...

NSK bearings have both rolling and sliding friction. Sliding friction is caused by the deviation of the rolling bearing on the surface curve and the deformation of the bearing under load. For example, between the rolling element and the ring, since the ball and the ring are not absolute rigid bodies, their contact area must alwa...

No matter what, it will wear out a bit after use. FAG bearings are the key equipment of the ultrasonic cleaning machine system. Because the imported bearings of the cleaning machine have extremely bad working conditions, they need to be operated under continuous shock, vibration, and overload, and the service life is more than 1...

For different types of SKF bearing ring blanks, although the diameter series and external dimensions are different, the inspection items and inspection methods after turning are basically the same. The general inspection items and methods of SKF bearing ring turning processing are as follows: 1. Ferrule single width dimension Cs...

Both lapping and super lapping are the final processing procedures of NSK bearing steel balls, and the processing of NSK bearing steel balls higher than G40 generally requires ultra lapping procedures. The final size deviation, geometric accuracy, surface roughness, surface quality and burn of the steel ball must meet the requir...

1.Ready shaft All components on the shaft are installed between the most positions of the two shafts. Ifan integral seal is used, this also includes Includes inside seal. Install the bearings on both sides of the shaft. For grease lubrication, fill the bearingswith grease. If the shaft is a stepped shaft, install spacers as need...